Submittal Package – 321SS Braided Metal Hose (304SS Male NPT)


Configure Product Page →

Flex Pipe USA
Dayton, MN | [email protected] | 763-200-2287

Engineering Submittal

Ref ID: FP-MH-321-304-MNPT-MNPT

PROJECT: ___________________________________ DATE: October 11, 2026
LOCATION: _________________________________ SUBMITTAL #: ____________
ENGINEER: _________________________________ REVISION: Rev 0
CONTRACTOR: _______________________________ DRAWING REF: __________
ENGINEER APPROVAL STAMP
[   ] APPROVED
[   ] APPROVED AS NOTED
[   ] REVISE & RESUBMIT
BY: ____________ DATE: ______

1. Assembly Description & Identification

321SS Braided Metal Hose Assembly – 304SS Sch.40 Male NPT x Male NPT
Configurable flexible connector for industrial and mechanical piping applications. Combines a 321 stainless steel annular corrugated hose core, a single-layer 304 stainless steel outer braid, and TIG welded 304 stainless steel Schedule 40 male NPT threaded pipe ends on both sides.

Male NPT Metal Hose Assembly Drawing
Assembly Detail

2. Materials & Construction
  • Corrugated Hose Core: 321 Stainless Steel (Annular)
  • Outer Braid: 304 Stainless Steel (Single Layer)
  • End Fittings (Side A & B): 304SS Schedule 40 Male NPT
  • Terminations: Continuous TIG Welded Construction
  • Wetted Flow Path: 100% Stainless Steel (321SS / 304SS)
3. Operating Limitations
  • Max Temperature: +1500°F (Base Hose) / +800°F (Fitting Limited)
  • Testing Standard: 100% Hydrostatic Test to 1.5x MAWP
  • Design Standards: EJMA Standards & ASME B31.3 Compliant
  • Applications: HVAC, pump isolation, steam/condensate, air

4. Dimensional & Pressure Rating Matrix
Hose ID (NPS) MAWP @ 70°F
(Max. Allowed Working Pressure)
MAWP @ 300°F
(Max. Allowed Working Pressure)
Min. Dynamic Bend Radius Standard Online OAL
0.50 in. (15mm) 1100 PSI 946 PSI 8.0 in. 12 in. through 72 in.
0.75 in. (20mm) 800 PSI 688 PSI 9.0 in. 12 in. through 72 in.
1.00 in. (25mm) 750 PSI 645 PSI 10.0 in. 12 in. through 72 in.
1.25 in. (32mm) 600 PSI 516 PSI 11.0 in. 12 in. through 72 in.
1.50 in. (40mm) 500 PSI 430 PSI 12.0 in. 12 in. through 72 in.
2.00 in. (50mm) 450 PSI 387 PSI 14.0 in. 12 in. through 72 in.

INSTALLATION REQUIREMENT: Tapered male NPT fittings must be installed using approved thread sealant. Do not torque or twist the flexible metal hose body during installation. Provide proper pipe anchors and alignment guides.
5. Quality Assurance & Certification

All assemblies are 100% leak tested prior to release. Material Test Reports (MTRs) and Hydrostatic Test Certificates are supplied upon request. Final suitability for design pressure, temperature, and cyclic movement must be verified during order review.