Submittal Package – 321SS Braided Metal Hose (CS Class 150 Flanges)


Configure Product Page →
Flex Pipe USA
Dayton, MN | [email protected] | 763-200-2287

Engineering Submittal

Ref ID: FP-MH-321-304-FLG150-FLG150

PROJECT: ___________________________________ DATE: October 11, 2026
LOCATION: _________________________________ SUBMITTAL #: ____________
ENGINEER: _________________________________ REVISION: Rev 0
CONTRACTOR: _______________________________ DRAWING REF: __________
ENGINEER APPROVAL STAMP
[   ] APPROVED
[   ] APPROVED AS NOTED
[   ] REVISE & RESUBMIT
BY: ____________ DATE: ______

1. Assembly Description & Identification

321SS Braided Metal Hose Assembly – Carbon Steel Class 150 Flanged Ends
Industrial flanged flexible hose connector for piping vibration isolation and alignment accommodation. Constructed with a 321 stainless steel annular corrugated hose core, a single 304 stainless steel outer braid, and carbon steel Class 150 RFSOF or floating plate flanges welded to ASME B16.5 bolt pattern standards.

Class 150 Flanged Metal Hose Assembly Drawing
Assembly Detail

2. Materials & Construction
  • Corrugated Hose Core: 321 Stainless Steel (Annular)
  • Outer Braid: 304 Stainless Steel (Single Layer)
  • Flanges (Side A & B): Carbon Steel Class 150 (RFSOF / Plate)
  • Bolt Circle: ASME B16.5 / B16.42 Class 150 Standard
  • Terminations: Continuous TIG Welded Construction
3. Operating Limitations
  • Max Temperature: +800°F (Flange/Media Limited)
  • Testing Standard: 100% Hydrostatic Test to 1.5x MAWP
  • Design Standards: EJMA Standards & ASME B31.3
  • Applications: HVAC chillers, pumps, steam, general B2B piping

4. Dimensional & Pressure Rating Matrix
Hose ID (NPS) MAWP @ 70°F
(Max. Allowed Working Pressure)
MAWP @ 300°F
(Max. Allowed Working Pressure)
Min. Dynamic Bend Radius Standard Online OAL
2.00 in. (50mm) 450 PSI 387 PSI 14.0 in. 12 in. through 36 in.
2.50 in. (65mm) 350 PSI 301 PSI 16.0 in. 12 in. through 36 in.
3.00 in. (80mm) 300 PSI 258 PSI 18.0 in. 12 in. through 36 in.
4.00 in. (100mm) 250 PSI 215 PSI 22.0 in. 12 in. through 36 in.
6.00 in. (150mm) 200 PSI 172 PSI 30.0 in. 18 in. through 48 in.
8.00 in. (200mm) 175 PSI 150 PSI 38.0 in. 24 in. through 60 in.
INSTALLATION REQUIREMENT: Torque flange bolts in a star pattern to ASME specifications using suitable gaskets. Ensure proper piping anchors and guides are installed adjacent to the flexible connection.
5. Quality Assurance & Certification

All assemblies are 100% leak tested prior to release. Material Test Reports (MTRs) and Hydrostatic Test Certificates are supplied upon request.